Thorens TD 124 DD 140th Anniversary

td 124 dd 140th anniversary 72

What does a company with such a rich history give to itself and its fans for its 140th anniversary? Clearly, a turntable that one can still be proud of in 20, 30, or 50 years. We have provided the limited TD 124 DD 140th Anniversary with the best prerequisites for this.

2020: The TD 124 returns - as the TD 124 DD

As manufacturers, we are naturally not entirely neutral. However, if we consider the Thorens TD 124 to be one of the great iconic turntables in Hi-Fi history, thousands of music enthusiasts, fans, and professionals worldwide will agree with us. The 60s-era turntable is immortal not only because of its proverbial durability but also because of its sound, which still captivates as it did 60 years ago. Our reissue of this classic faced a significant challenge: combining the design language of the legendary predecessor with sound quality of timeless relevance and the advantages of modern design and manufacturing methods. We took our time. And in 2020, after years of development, we introduced the TD 124 DD, a completely new player dressed in the attire of its famous ancestor. It possesses the same musicality and future-proofness, along with a newly developed world-class tonearm, the TP 124.

 TD 124 DD 140th Anniversary: Valuable Upgrades for the Jubilee

The worldwide success of our TD 124 DD did not prevent us from continuing to research, listen, and experiment with this already highly perfected player. In the process, we have discovered some truly effective upgrades that are now incorporated into our anniversary player, the TD 124 DD 140th Anniversary. One visible upgrade at first glance is the new two-layer platter, which connects the already heavy aluminum platter of the 124 DD with a five-millimeter-thick layer of solid copper. The sonic success of this measure is not solely due to the increased mass but also the interaction of two different materials whose resonances cancel each other out. Concerns about the platter bearing are unfounded as we had already generously over-dimensioned it for the TD 124 DD, as well as the drive, which could handle even larger loads in motion.

Less obvious than the sandwich platter but equally rewarding is the new wiring of the TP 124 tonearm. In the Anniversary version, high-purity silver wire connects the cartridge to the outputs. We believe that the new wiring particularly makes a positive impact with low-output moving coil (MC) cartridges. This system family also includes the third exclusive upgrade of the Anniversary: a special version of our SPU 124, produced by the Danish manufacturer Ortofon with coils made of pure silver. We even convinced Ortofon to manufacture the classic cartridge housing from the old material, Bakelite, instead of the newer fiber-resin composite. Those who are eager to add one to their SPU collection must be disappointed: This limited-edition world-class MC cartridge is only available as a package with the TD 124 DD 140th Anniversary.

 Arm and Drive in Proven Reference-Class Quality

The powerful direct drive of the TD 124 DD is also utilized in the Anniversary model. It guarantees long-term perfect and quiet operation with complete maintenance-free performance. And it provides that special dynamic grip reminiscent of the firm friction wheel sound of the 60-year-old original model but enriched with new and elegant facets. Apart from the silver wiring, the TP 124 tonearm is the same as the 2020 model. Its torsion-resistant arm tube, slightly higher effective mass, outstanding bearing quality, and the SME headshell coupling make it a competent guide for the finest MC systems.

 The eye also celebrates: The Anniversary Finish

To match the occasion, we have selected a timeless and beautiful real wood veneer that visually transforms the TD 124 DD 140th Anniversary into a precious rarity. For a harmonious overall impression, we have enhanced not only the plinth but also the armboard with high-gloss lacquered and hand-polished wood. We naturally remain faithful to the classic, unobtrusive, and relatively compact proportions of the turntable. This creates an analog gem that combines refined design and uncompromising quality with rare consistency.

 We would love to build more, but...

...we have decided to release only 140 units of our Anniversary model onto the market. It should remain truly special. Since the limited quantity alone ensures exclusivity, we deliberately calculated the price to be moderate: The TD 124 DD 140th Anniversary is only available as a complete set, including the SPU 124 Anniversary, for the price of €11,999.

 

Thorens New Reference

Thorens New Reference

Reference silver Black front

 Fully integrated active vibration isolation by Seismion

The Thorens New Reference is the result of our strive for the perfect rendition of music recordings. The electrical signals in a turntable are created by mechanical vibrations of the stylus of the cartridge while it moves along the grooves of a vinyl record. These vibrations are converted into the sound.

In exactly the same way, all other mechanical vibrations of the turntable are processed and lead to distortion and other unwanted effects. The sources of these vibrations are for example building vibrations, people walking around, the sound waves of the music and self-generated vibrations from the turntable itself. Since it is not possible to distinguish between the actual music vibrations and parasitic disturbances, these must be avoided as much as possible.

The Thorens design team around Helmut Thiele, who is responsible for the construction and design of the new Reference, have taken on this challenge.

With the Thorens New References, for the first time ever a turntable is designed and optimized from scratch together with a fully active vibration isolation system. Thorens teamed up with the German company Seismion, which is internationally renowned for its class-leading active vibration isolators, to create a turntable, that is designed around the vibration isolation system as an integral part of the system. Seismion fully exploited its expertise in active isolation systems used for semiconductor industry, nanotechnology and scientific laboratories, to create a vibration isolation never seen and experienced in turntables before.

The active vibration isolation is based on piezoelectric acceleration sensors with an extremely high sensitivity, and an all-linear electronic control circuit to generate unrivalled low noise- and distortion-free control forces. This sophisticated mechatronic system is based on so called Sky-Hook-Damping and isolates disturbances already below 1 Hz and reduces them to less than 1% (-40 dB) at frequencies of 10 Hz and above. Such a performance is far superior to any other isolation (figure 1). This figure shows the comparison of the active isolation system - Sky-Hook-Damper - and a high-performance Air Spring. Especially at the critical frequencies around the resonance, the active isolation has a performance which is up to 100 times better. At 10 Hz it is still about 17 times stronger isolated than with an Air Spring. Other dampers like rubber mounts are on a much lower performance level and not shown in this comparison.

bild1

The overall system is designed in a way that the centre of gravity - COG - is close to the plane of isolation. In this way, the coupling of horizontal vibrations and tilting motions are greatly reduced (figure 2). Furthermore, the chassis itself is made non-resonant by its layered structure of highly damped materials.

bild2

The result of the vibration isolation is simply pure music like one has hardly experienced. The effect goes far beyond the simple elimination of foot-fall vibrations. In fact, even tiny vibrations in the range of nano meter down to pico meter are still efficiently isolated, due to the contact-less actuators. The system also follows music with high dynamics between quiet and loud sequences extremely quickly, since the active control forces stabilize the system and lead to an instantaneous settling time of the isolation system. An adaptive levelling system, which keeps the turntable precisely levelled within 20 micro meter completes the active isolation system.

 Drive unit with innovative platter absolute-velocity-damping by Seismion

The other fundamental part of every turntable is the drive unit. The ultimate goal is to realize the perfect and constant rotation speed of the platter. This concerns both the absolute speed and modulations of the speed around the mean value also called wow and flutter.The Thorens New Reference features a high-quality German-made 3-phase synchronous motor, which is driven by three all linear power amplifiers with 120° shifted sine signals. The motor torque is transmitted to the platter by a belt (figure 3). The hydrodynamic bearing is optimized by use of lubrication theory equations. In this context the Sommerfeld-number is used, which describes the thickness of lubrication film and the diameter of the bearing. This number is named after german physicist Arnold Sommerfeld, who conducted several fundamental research in the field of hydrodynamics. A small Sommerfeld-number means the bearing is centered already at very low rotation speeds, which minimizes the wear and ensures minimum out of center errors like eccentricity and whirl. The hydrodynamic bearing is made and hand-finished in Germany.

bild3

Together with the innovative active damping technique, the belt-driven approach has several significant advantages:

  1. Unlike Direct Drive systems, the turntable platter is isolated from the drive motor because of the elastic belt. The high inertia of the platter is therefore efficiently utilized and helps to passively remain a constant velocity of the platter. Moreover, any fluctuations from the motor are strongly supressed by the platter/belt second order low-pass characteristics.
  2. A common disadvantage of belt-driven systems is the potential resonance of the platter, which is observed as wow and flutter. The rotational inertia of the platter forms together with the elasticity of the belt an oscillatory system. The resonance frequency is typically about 4 Hz, but depends on the actual parameter values of the system. The orange graph in figure 4 shows a peak around 4 Hz, where all disturbances are strongly amplified. This means that the rotation speed of the platter is no longer constant, but modulated with 4 Hz around the mean velocity. This effect is known as wow, and highly undesired, especially since the human ear is most sensitive to this frequency range. Figure 5 displays the weighting curve as described in DIN 45507 or IEC 386. The maximum of this weighing unfavorably coincides with the typical resonance of the platter / bearing system. Vibrations of the platter are excited mainly by the friction in the platter bearing, by a not perfectly circular platter, by irregularities of the belt and by slip between the belt and platter, which is necessary to transmit the torque from the motor. The orange graph sharply drops of for higher frequencies. This is the desired effect of the platter inertia.

bild4

bild5

The Thorens New Reference features an innovative and highly effective active damping system by Seismion. The deep knowledge and experience with sky-hook-damping systems featured in the active vibration isolator “Reactio” are used for the all new active damping approach of the platter.

The rotation speed calculation of the platter is based on two ultra-high-precision quartz-oscillators with a long-term stability of max. 3 ppm over 20 years, allowing for a safety cross check and reliable speed control over the life time of the New Reference. In fact, it means that the absolute speed remains within a range of 33.3332 to 33.3334 rotations per minute over 20 years.

The signal of the high-precision rotation encoder, which is mounted on the platter-shaft, is fed into the control electronics, which realize an absolute-velocity-damping of the platter. The effect might be compared to a highly viscous platter bearings, that are commonly used in belt-driven turntables. However, the active damping system designed for the Thorens New Reference has several advantages compared to passive damping techniques realized by viscous platter bearings:

  • The active damping reduces the resonance amplification at 4 Hz, and keeps the sharp drop at higher frequencies, while a highly viscous platter bearing has a negative effect on higher frequencies, since the graph does not drop as sharply, and the inertia effect of the platter is not utilized in the best way
  • The active damping effect can even be increased much further (lower blue line in figure 4) than by passive means, maximum passive viscous damping is shown as dashed orange line in figure 4
  • The platter bearing can be designed to be as friction-free as possible, since the damping is generated actively. As a result this bearing only generates minimal constant braking moment, in contrast to a viscous damped bearing.

Due to the low braking moment the stresses on the motor and belt are significantly lower. Therefore all disturbances are minimized and also lifetime is enhanced. The active damping does not create any constant braking torque, but only dynamic moments to eliminate the modulation frequencies.

As a result, the absolute-velocity-damping system in the Thorens New Reference efficiently absorbs any frequency modulations at the highest level possible.

Lastly, also the active isolation system which is explained in the previous section also contributes to a better Wow and Flutter performance, since it stabilizes the whole sub-chassis on which the platter is placed.

The Thorens New Reference can be equipped with up to 3 tonearm bases and can accommodate tonearms of 9", 10", and 12" inches. In addition to the newly developed TP160 cutting bearing tonearm with a length of 12" inches and continuous silver cabling, the Thiele TA01 tonearm is also used.

The complex kinematics of the Thiele TA01 combines the precise and rigid guidance of a pivoted tonearm with the advantages of a tangential tonearm. This design guides the cartridge with a maximum tracking error angle of 0.036 degrees across the record. The tonearm tube is double-walled and filled with a 2-component gel for optimal damping. The result of this design is a unique spatial resolution, extreme detail, and perfect tonality.

We are very proud to present this worldwide innovation for the 140th anniversary of Thorens during the High-End Show in Munich, says Thorens Owner and Managing Director Gunter Kürten.

 

New Thorens Turntable 204

THORENS presents a new belt-driven manually operated turntable for music lovers with high demands. The TD 204 has all the attributes of a premium turntable with an exceptionally good price/performance ratio.

Thorens TD 204

The THORENS TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.
The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.

The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.

The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.

The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.

The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

RRP: 799,00 EUR
EAN: 4260623590883 black high gloss
EAN: 4260623590890 walnut high gloss
Availability: December 2022

Download High Res Fotos: https://thorens.com/de/produktbilder/category/td-204.html
Registration required

New Thorens Turntable TD 1500

In 1965, the Thorens TD 150, an inconspicuous little turntable, came on the market and thus started a technical revolution in record player manufacturing. For the first time, a spring-suspended sub-chassis with an inner platter driven by a flat belt was used in a mass-produced unit. The principle proved to be very successful and found many imitators in the years since.
Even today, more than half a century later, old TD 150 models still enjoy great popularity.
Picking up on this historic milestone, Thorens is introducing a new model in 2021, the TD 1500, which is very much in the tradition of its legendary predecessor but utilizes 21st century technologies.

Like its famous predecessor, the new Thorens TD 1500, which will be operated purely manually, features a sub-chassis that decouples the turntable and tonearm shelf from the motor and frame by means of three conical springs. In contrast to the TD 150, these springs can be adjusted from above through corresponding holes in the platter, which makes correct adjustment much easier. The platter does not have to be removed for this. The platter itself, which weighs 1.4 kg and is 22 mm thick, is made of cast aluminum with a ground edge and turns its rounds in a bearing with a Delrin trust bearing, which guarantees enormously smooth running.

The speed of the DC motor is electronically monitored by an incremental encoder and deviations, e.g. caused by a broom, are automatically corrected. This also enables very good wow and flutter values

As a real unique selling point in its class, the TD 1500 has XLR outputs in addition to the usual pair of RCA jacks, thus enabling true balanced operation with a suitable MC cartridge.

Power is supplied to the drive by a 12V power supply unit.

Newly developed Thorens TP 150 tonearm

The new TP 150 tonearm is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.

The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

This guarantees the smoothest possible operation. The contact force is set classically on the scaled and two-part counterweight. This allows a wide selection of pickups to be used, from 6 - 30 grams weight.

The new Thorens TD 1500 combines traditional Thorens genes with contemporary modernity and proves a successful transformation of the TD 150 into today's world.

A high-quality and pre-adjusted 2M Bronze pickup from the Danish pickup specialist Ortofon, is also supplied as standard. This proves to be a perfect playing partner due to its naked diamond with Fine Line cut.

The Thorens TD 1500 is available in walnut or black, each in high gloss, from November 2021 in stores. A cover, as well as an RCA cable are included in delivery.
The RRP is incl. cartridge Ortofon 2M Bronze € 1999,--.

TD1500

Thorens TD 403 DD

New Thorens direct drive turntable TD 403 DD

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model. A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

The purist and audiophile claim of the new model is emphasized by the omission of an auto stop function and integrated phono preamplifier.

The new turntable is powered by a 24V power supply

Newly developed Thorens TP 150 tonearm

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

This guarantees the smoothest possible operation. The contact force is set classically on the scaled and two-part counterweight. This allows a wide selection of pickups to be used, from 6 - 30 grams weight.

With the new TD 403 DD, Thorens rounds up its range of direct-drive turntables that are practically ready to play right out of the box.

The Thorens TD 403 DD will be available in walnut or black, both in high gloss, from November 2021 in stores. A cover, as well as an RCA cable are included in the scope of delivery.
The RRP including cartridge Ortofon 2M Blue € 1399,--.

TD403 DD

  • 1
  • 2
We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.